Patrik Foil S2

SKU: PATRIK_FOIL_S2
RRP:

3,6
4,2
4,8
5,4
6,0
6,6
7,2
7,8
8,4

COMPETITION SLALOM/SPEED FOIL SAIL OPTIMISED FOR FLYING ON THE LIMIT WITH MAX AVERAGE SPEEDS.

OVERVIEW

Control, control, control. The FoilS2 is a pure slalom and speed foil sail for the competition rider who is searching for the fastet and most technically advanced foil sail out there. The high aspect ratio design allows for perfect aerodynamics. We have optimised the sail for maximum average speed. The more controlled and equal the speed of your flight is the easier you can move closer to the edge of what's possible in modern foil racing.
The newly developed sizes 4.2 and 3.6 are designed as 6 batten sails with 3 cams as we found this combination to provide the best mix of stiffness, controlled flex and reduced sail weight in nuclear foiling conditions.

You want the perfect foiling machine?! Here comes the PATRIK FoilS2.

PERFORMANCE

EARLY TAKE-OFF 9/10  
ACCELLERATION 8/10  
TOP SPEED 10/10  
AVERAGE SPEED 9/10  
HIGHEND CONTROL 9/10  
UPWIND ANGLE 9/10  
HANDLING 7/10  
FRONT- / BACKHANDED 5/10  
WINDRANGE 9/10  
WEIGHT / DURABILITY 5/10  
RIDER LEVEL 9/10  


* Compared to our other pure racing sails. (red)

SPECS

  Luff
(+- 1 cm)
Boom
(+- 1cm)
Ideal mast Alternative softer mast Cambers
3.6 355 151 SDM 340 – IMCS 15 / 3
4.2 385 159 SDM 380 – IMCS 17 / 3
4.8 409 169 SDM 400 – IMCS 19 SDM 380 – IMCS 17 4 (3 + 1)
5.4 431 175 SDM 420 – IMCS 21 SDM 400 – IMCS 19 4 (3 + 1)
6.0 451 183 SDM 440 – IMCS 23 SDM 420 – IMCS 21 4 (3 + 1)
6.6 473 191 SDM 460 – IMCS 25 SDM 440 – IMCS 23 4 (3 + 1)
7.2 495 199 SDM 480 – IMCS 29 SDM 460 – IMCS 25 4 (3 + 1)
7.8 519 203 SDM 500 – IMCS 32 SDM 480 – IMCS 29 4 (3 + 1)
8.4 539 213 SDM 520 – IMCS 33 SDM 500 – IMCS 32 4 (3 + 1)

CONSTRUCTION

Racing is a "no-compromise" area in Patrik Diethelm's dictionary. Every detail is being optimized with maximum performance in mind.
All the panels inside the sleeve are made by the thickest monofilm available which provides the best stiffness and a locked profile where the main shape is. The main panels are 5 MIL clear monofilm from B7 to B4 and then 4 MIL above that batten. Why always clear? Because this material is few grams lighter than its coloured alternative! For the foot panel and a minimalistic area around the clew we kept a good impact resistance 5 MIL red x-ply materials. That are is often stressed when your sail rubs on the deck grip of the ultra-wide racing boards. Along the leech, you find again 5 MIL (closer to the clew) and 4 MIL (closer to the top) clear x-ply to keep the rear edge of the sail stable and aerodynamically clean even in hi-wind choppy conditions. For the mast sleeve, we reduced the amount of PE fabric material (which stretches more and absorbs little amounts of water) and maximized the 2 MIL x/scrim-ply area instead, which is super light but still with the highest number of fibres per sqm. - so this material is perfect to spread the load across the whole sail.

TRIM

Make sure to set the required downhaul indicated by the colour changes on the batten sleeves. Use the clew trim options to adjust the sail to the wind conditions.

Pro Tips

 ALEX COUSIN (Sails R&D)

"Fast and controlled, giving you the most stable flight without sudden load changes. This is the most advanced concept of a pure foil sail out there. Not lifting the nose in the gusts, never pushing you down and aerodynamically perfect!"

Alex Cousin FoilS2
Nicolas Warembourg FoilS2

‌ NICO WAREMBOURG (2x DEFI winner)

"For the DEFI competition I need a sail with the best possible average speed no matter how the conditions will change on the long reach. The FoilS2 can handle difficult up- and downwind angles with ease and is the most controlled foil sai I've ever used."

 MICHELE BECKER (German Tour Winner 2022)

"This is my favourite sail of all times. The Foil S2 gives me the control and speed I need to win races. Use the trim options to adjust the sail for your needs. Use the high clew position as a standard and the low position to depower the sail and gain even more control."

Michele Becker FoilS2

Add a product review!

Share your experience with this product with the user community!

Like deals? Of course you do.

Subscribe to our newsletter to get the latest news about our products, our supporters and our Pro Team.

By subscribing to our newsletter you are agreeing with our privacy policy and that we store and process your personal data for the purpose of periodically sending notifications to the entered e-mail address until cancellation.

Company

Information

About Us

Shaping with more than 25 years of technical expertise, Patrik Diethelm is far more than just another name in windsurfing. From his humble beginnings as a shop customer himself to a high-profile F2 brand employee and PWA professional, his move to founding the brand PATRIK together with Karin Jaggi in 2010 was simply a natural progression. Today we create windsurfing boards and sails, rig components, foils and fins and some of the most advanced wings and boards in the industry. In windsurfing we find our roots. Windsurfing is still driving us. Winging, surf foiling and any other windsports are what we came to love more and more over the years.
Join the PATRIK family now!